KSUNsolar is a manufacturer and supplier of solar energy products with high quality.

Monofacial Solar Panel

Monofacial Solar Module / Panel

KSUNsolar Monofacial Module Series

Monofacial solar panels are the traditional form of solar panels with solar cells on one side. They absorb the sun’s energy from one photovoltaic side and convert it into electrical energy for charging electronic appliances. The majority of solar panels available in the market are monofacial modules.

 

However, compared to the bifacial panels, the monofacial modules are more affordable. It’s easier to install them as well. Since just one side catches the sunlight, they’re less expensive than bifacial modules in theory and otherwise. Another benefit of monofacial solar panels is that they are lighter than bifacial panels.

KSUNsolar manufactures a complete range of 166mm, 182mm and 210mm options to meet the needs of different application scenarios.

Monofacial Solar Module / Panel

KSUNsolar Monofacial Module Series

Monofacial solar panels are the traditional form of solar panels with solar cells on one side. They absorb the sun’s energy from one photovoltaic side and convert it into electrical energy for charging electronic appliances. The majority of solar panels available in the market are monofacial modules.

 

However, compared to the bifacial panels, the monofacial modules are more affordable. It’s easier to install them as well. Since just one side catches the sunlight, they’re less expensive than bifacial modules in theory and otherwise.

 

Another benefit of monofacial solar panels is that they are lighter than bifacial panels.

 

KSUNsolar manufactures a complete range of 166mm, 182mm and 210mm options to meet the needs of different application scenarios.

Solar Cell

Solar Cell

Solar Cell

Datasheet Download 

Half-Cut Solar Cell Series

Half-Cut Solar Cell Series

Half-Cut Solar Cell Series

Advanced Half-Cells Technology

Modern production techniques make half cut solar cell panels more worthwhile. A solar cell is cut in half, it will produce half as much current and one fourth as much resistance. However, there’ll be twice as many of them. So, if they are wired up to operate like a standard solar panel, the current would be the same but with half the resistance. This lower resistance reduces electrical losses and improves panel efficiency. Thus half-cut cells divides the internal current in the system and improves its performance, longevity and shade tolerance. As power loss is proportional to current, half-cut solar panels reduce the power loss by a factor of 4 which increases the power output.

Why half-Cell is now more in Solar Technology?

If you have followed our most-efficient commercially available solar panel list, Half-Cut (Half-Cell) is one of the most efficient and powerful technologies in PV modules manufacturing. Now let’s briefly check the secret behind this choice.

 

Cutting a solar cell so exactly that it is divided into two same halves has been proven to be an effective way to “lower resistive power loss”. Each of the sliced cells, half-cut cell, generates half the current of a full cell. Respectively, due to the direct relationship of electrical losses with the square of the generated electric current in a cell, this results in reducing resistive losses in the interconnection of solar modules.

 

Less resistance between the cells increases the power output of a module. It is also worth noting that two halves of cells are connected in series to each other in PV module manufacturing. Therefore, a solar module with half-cut cells generates more power than a standard module with full cells.

 

So, by cutting solar cells in half, the current generated from each cell is halved, and lower current flowing leads to lower resistive losses as electricity moves throughout cells and wires in a solar panel. Higher shade tolerance Half-cut cells are more resistant to the effects of shade than traditional solar cells.

Monofacial Solar Module

Technical Features

Compared to the bifacial panels, the monofacial solar modules are more affordable. It’s easier to install them as well. Since just one side catches the sunlight, they’re less expensive than bifacial modules in theory and otherwise. Another benefit of monofacial solar panels is that they are lighter than bifacial panels.

Multi-Busbar

Better current collecting; improved ability to prevent

the risk of broken finger grids and microcracks.

 

Non-Destructive Cutting

Non-destructive cutting can improve the mechanical

strength of cells, limit the risk of invisible fissures and

enhance module reliability.

PERC Wafers

Better temperature coefficient and weak light performance, lower degradation rate.

Anti-hotspot

When hot spots occur, the hot spot temperature of a half-cut module is 10-20℃ lower compared

to a normal module in the same environment and application scenario.

Low working temperature

Current running through the module is halved as the module uses half-cut cells,

the lower cell energy consumption helping to reduce operating temperature.

Not affected by shading

When the lower half of a half-cut module is shaded by horizontal PV arrays,

power generated by the upper half will not be affected.

Adaptable to high temperatures and irradiation levels

In high temperature and high irradiation environments, the output of a half-cut module is higher.

Full Service Professional Team

KSUNsolar Team

Professional pre-sales support,

comprehensive support from product technology to system solution.

Strict monitoring of production lines and product quality control to meet the demands

of different customers.

Strict monitoring of production lines and product quality control to meet the demands

of different customers.

In addition to its latest products, KSUN can also offer tailored versions of previous products, according to customers’ special requests.

APPLICATIONS

KSUN Monofacial Solar Module

Solar Modules
Solar Modules monofacial solar panel
Solar Modules
Solar Modules monofacial solar panel
Solar Modules
Solar Modules monofacial solar panel

CONTACT PERSON : Mr. Aiwah Tsou
TEL : (+86) 189 2140 9789
E-MAIL : sales@ksunsolar.com
WHATSAPP : (+86) 189 2140 9789
OFFICE ADD : No.59 Wan'An Road West, Jiangning District,
Nanjing, 211103, China.
SKYPE : solarksun

Get Started with KSUNSOLAR

We'll help you figure out your solar power needs !

If you have any inquiry of our products, please do not hesitate to send a message here,

we will reply you in 24 hours !  Your detailed requirements will get more exact answer.

 

*** Your privacy is very important to us.  We will never share your contact information.

Chat Online
Chat Online
Leave Your Message inputting...
hello
Sign in with: